Scale: 1/4" = 1'-0"
Elevations -
Scale, heights, and roof slope.
Foundation Plan -
Footing details and wall thickness.
Dimensioned Floor Plans -
Room labels and sizes; ceiling heights if different than standard room heights.
Framing Details -
Plate heights and wall sections included.
Roof Plan -
Scale, beam locations and orientation. Roof plan is stick-built only, but truss plans can be drawn by builder's lumber suppliers at no charge. Snow loads are also included.
Cross Section -
Multiple building sections are provided.
Electrical Layout -
Switches, circuits, smoke detectors, wall and floor fixtures, fans/lights, and recessed/can lighting.
Cabinet Elevations -
Basic cabinet configuration is shown for the general kitchen layout.
Window and Door Schedule -
Nominal window/door sizes and operation are shown on the floor plans at the location of each window/door, and also sometimes shown on a schedule.
IRC Details - In most cases, the code-related notes, details, and specifications will be compliant to the current IRC code. In cases where the IRC code information is not yet updated, contact the designer for further guidance; an update to the latest code information is often a simple matter. Structurally, parts of the design are prescriptively designed.
CAD Software: Revit
These items are NOT included and can be handled locally if required: